Dometic Frigo DC 2500, Installation Manual

Page: 35 / 124

35
EN
Frigo DC Connecting the transport refrigeration system
➤
Route the condensation hose along the refrigerant hoses to the evaporator.
➤
Guide the condensation hose outside through the base of the vehicle, so that
the condensate is discharged.
➤
Connect the fan and the temperature sensor in accordance with the circuit
diagram (fig.
f
, page 10, fig.
g
, page 10 and supplementary sheet).
I
➤
Attach the cover
–
with 4 x bolts for Frigo DC 2500 or
– with 6 x bolts for Frigo DC 3500.
➤
Connect the condensation hose to the cover with the hose clamp 10 – 16
(fig.
l
, page 13).
➤
Attach the sticker.
9.5.4 Connecting cables to the DC unit
Proceed as illustrated (fig.
m
, page 13):
➤
Route the refrigerant hoses under the vehicle to the DC unit.
➤
Route the extension cable under the vehicle to the DC unit.
➤
Connect the refrigerant hoses.
➤
Connect the extension cable.
➤
Route the connection cable of the DC unit to the vehicle’s battery.
9.5.5 Connecting the transport refrigeration system to the battery
➤
Connect the connection cable for the DC unit to the battery in accordance
with the circuit diagram (fig.
f
, page 10, fig.
g
, page 10 and supplemen-
tary sheet).
➤
Mount the fuse supports as illustrated (fig.
n
, page 14).
➤
Connect the earth connections to the vehicle chassis.
NOTE
Ensure that the connection cables are inside the cover when installing the
evaporator cover.
Frigo_DC-I-West.book Seite 35 Mittwoch, 24. Juni 2020 11:27 11