EN
FreshWell3000
Disposal
13
9
Disposal
Regulations for environmental safety and correct disposal
All organisations must apply a set of procedures to identify, evaluate and control the
influence that their activities (manufacturing, products, services, etc.) have on the
environment.
The procedures to be followed to identify significant environmental impact must take
the following factors into account:
•
use of raw materials and natural resources
•
atmospheric emissions
•
discharge of liquids
•
waste management and recycling
Water enters the
vehicle
The condensation water drainage open-
ings are clogged up.
➤
Clean the drainage openings for
condensation water.
The seals are damaged.
➤
Contact an authorised workshop.
Under-bench air
conditioner does
not switch on.
No supply voltage (230 V
w
) connected.
➤
Check the power supply.
The voltage is too low (under 200 V
w
).
The voltage converter is defective.
➤
Contact an authorised workshop.
The defective thermal protection is
defective.
The electrical fuse of the power supply is
too low.
➤
Check the electrical fuse of the
power supply.
Under-bench air
conditioner stops
working.
The air filter is obstructed.
➤
Clean the air filter.
The voltage is too low (under 200 V
w
).
The voltage converter is defective.
➤
Contact an authorised workshop.
The defective thermal protection is
defective.
The condenser fan is damaged.
The heat exchange coils are polluted.
The external blower is defective.
Under-bench air
conditioner does
not switch off.
One of the temperature sensors is
defective.
➤
Contact an authorised workshop.
Problem
Cause
Remedy
FreshWell3000-I-16s.book Seite 13 Mittwoch, 12. Dezember 2018 2:11 14
