EN
DM50NTE
Cleaning and maintenance
21
9
Cleaning and maintenance
!
A
➤
Occasionally clean the device interior and exterior with a damp cloth.
➤
Make sure that the air inlet and outlet vents on the device are free of any dust and
dirt, so that heat can be released and the device is not damaged.
➤
Occasionally clean the inlet filter.
➤
If you find water in the drip tray (fig.
2
3, page 3) check whether the drainage
system is blocked.
10
Guarantee
The statutory warranty period applies. If the product is defective, please contact your
retailer or the manufacturer's branch in your country (see back page).
For repair and warranty processing, please include the following documents when
you send in the device:
•
A copy of the receipt with purchasing date
•
A reason for the claim or description of the fault
11
Disposal
➤
Place the packaging material in the appropriate recycling waste bins wherever
possible.
M
If you wish to finally dispose of the product, ask your local recycling centre
or specialist dealer for details about how to do this in accordance with the
applicable disposal regulations.
WARNING! Electrocution hazard
Always disconnect the device from the power supply before you clean
and service it.
NOTICE! Risk of damage
•
Never clean the cooler under running water or in dish water.
•
Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the cooler.
DM50NTE_IOM_EMEA16.book Seite 21 Donnerstag, 8. August 2019 2:05 14
