EN
Installation
DM50NTE
18
6.6
Mounting the lock (lock version only)
➤
Drill a hole with a diameter of 35 mm into the decor.
➤
Mount the lock together with the lock decor.
6.7
Mounting the lock (no lock version only)
Disassembling the drawer (fig.
0
, page 8)
➤
Open the drawer completely (
A
).
➤
Press the rail lock (
A 1
).
➤
Pull the drawer out of the cabinet (
B
).
Only for DM50NTE D:
➤
Remove the two plugs (
C 1
) from the screws (
C 2
) of the door handle (
C 3
).
➤
Unscrew the two screws (
C 2
) of the door handle.
➤
Remove the door handle (
C 3
).
➤
Remove the gasket.
➤
Remove the lock cover.
Drilling the holes (fig.
a
, page 8)
➤
Drill a hole (
A 1
) with a diameter of 23.6 mm through the decor (only
DM50NTE D) and the door.
➤
Unscrew the twelve screws (
B 1
) of the decor frame (
B 2
) (only DM50NTE D).
➤
Remove the decor frame (only DM50NTE D).
Assembling the lock (fig.
b
, page 9)
➤
Put the new lock cover (
A 1
) into place.
➤
Put the decor (
B 1
) into the decor frame.
➤
Screw (
B 2
) the decor frame (
B 3
) onto the door.
➤
Install the door lock (
C 1
).
➤
Install the lock catch (
D 1
) in the cabinet.
DM50NTE_IOM_EMEA16.book Seite 18 Donnerstag, 8. August 2019 2:05 14
