EN
DA20DC
Installing the awning
19
➤
Use two people to hook the awning on to the mounting bracket (fig.
e
,
page 2).
Check whether the awning has been properly hooked and that it is flush
against the wall.
!
WARNING!
Do not open the awning or leave it unattended, before the awning
has been fastened to the mounting bracket.
➤
Fasten the awning to the mounting bracket with the self-tapping bolts
(fig.
f
, page 2).
➤
Connect the awning electrically (see chapter “Connecting electrical power
to the awning” on page 20).
Contact a qualified electrician to ensure compliance with all legislative
regulations.
➤
Put on the right-hand cap cover (fig.
h
, page 2).
➤
Push the covers on the backer plates until both lugs are engaged.
➤
Attach the wall bracket for the remote control at a suitable location inside
of the RV and protected against direct sunlight (fig.
j
, page 2).
Summary of Contents for DA20DC
Page 161: ......
