13
4.4.2 Water connection for the CTS
3xxx, CTW 3xxx, CTLP 3xxx models
The water supply is connected in the same
way as with the CT 3xxx model via a module
(Fig. 22). The water connection module is
already installed in the console. The CTW 3xxx
model with the integrated water tank already
contains the electric water pump and the filling
nozzles for external fresh water supply.
4.4
Water connection
The water supply is connected via a module
(Fig. 10) where the water feed hose is atta-
ched. The fresh water tank is linked at con-
nection
"1"
. The toilet flush is provided via
connection
"2"
. Install the water connection
module on the vehicle's wall in an accessible
position (Fig. 23). Wall holder
"3"
serves to
absorb a module and an optional water tank.
Fit all hose connections with ring clamps and
then check leak tightness.
Always install the water connection module
above the toilet's highest water level (h = min.
50 mm).
If the water connection module is installed
below the water level, there is a risk of foul
water flowing back into the tank.
CAUTION!
4.4.1 Connecting the water supply for
the CT 3xxx toilet
Installing the toilet
Fig. 22
2
1
3
Fig. 23
h
Summary of Contents for CT 3050
