Dometic CoolPower MPS-35, Installation And Operating Manual

Page: 9 / 144

EN
MPS35 Using the mains rectifier
9
•
The place of installation must be well-ventilated. A ventilation system which is at
least equivalent to the air openings in the device must be present for installations
in closed housings.
•
The air intake on the underside or the air outlet on the back of the device must
remain clear.
•
The installation surface must be level and sufficiently sturdy.
➤
Fasten the mains rectifier with screws through the fastening holes in the front and
the rear of the device (fig.
1
4, page 3).
7 Using the mains rectifier
!
A
!
➤
Determine the required cross section of the cable in relation to the cable length
according to fig.
3
, page 3.
Key for fig.
3
, page 3
WARNING!
Do not reverse the polarity. If the poles are reversed device may over-
heat and be damaged.
NOTICE!
Replace defective fuses with new ones of the same rating (15 A slow-
blow).
WARNING!
Protect the positive connecting cable to the battery by an external fuse
of 10 A (fig.
2
4, page 3).
Insert the fuse as near as possible to the battery.
Co-ordinate axis Meaning Unit
l Cable length m
∅
Cable cross section mm²
MPS35-IO-16s.book Seite 9 Mittwoch, 20. Juli 2016 7:09 19