Dometic CoolMatic CRD 50, Installation And Operating Manual

Page: 15 / 324

EN
CRD0050 Installing and connecting the refrigerator
15
Install the refrigerator so that the warm air produced can easily flow away (either
upwards or to the sides). Therefore make sure there is adequate ventilation (fig.
3
,
page 4).
The condensation which forms during normal operation of the refrigerator can be
drained off via two outlets on the refrigerator. For delivery purposes, these outlets
are sealed. The two outlets are located on the rear and on the underside of the refrig-
erator (fig.
4
, page 4).
➤
Choose the condensation outlet most suitable for the place of installation and
remove its cap.
➤
Insert a sharp object (e.g. a screwdriver) approx. 25 to 30 mm into the outlet to
pierce open the inside of the refrigerator.
➤
Remove the drip-tray (fig.
5
1, page 5).
➤
Connect a hose (fig.
6
2, page 5) to the outlet connections (fig.
6
1, page 5).
No. in
fig.
3
, page 4
Explanation
1 Cold intake air
2 Hot waste air
3 Condenser
4 Spacing above the refrigerator if insufficient air can circulate above
or at the side
CRD0050--IO-16s.book Seite 15 Mittwoch, 16. August 2017 10:30 10