EN
Dometic CK150
Mounting the extractor hood
19
5.1
Control elements
6
Mounting the extractor hood
Note on installation location
The extractor hood should preferably be mounted above the cooking zone
and built into a suspended cabinet if possible. The distance between the gas
hob flame and the extractor hood must be at least 50 cm.
The fan should be mounted on the roof on a level surface. When mounted on
a sloping surface, the roof hood must be rotated so that one of the three wa-
ter drainage holes is directed toward the incline. A tilt angle up to 20° will not
affect the performance of the fan when the motor is not running.
6.1
Mounting the fan
➤
Select an appropriate installation location for the fan on the roof.
➤
Draw the location and size of the opening of 105 mm diameter (fig.
3
,
page 3).
➤
Pre-drill and cut out the hole on the roof carefully with a keyhole saw or
similar tool.
➤
Place the fan on the opening and mark the six screw holes.
➤
Apply a thin ring of a permanently elastic sealing material around each
hole.
➤
Put the rubber seal (fig.
5
4, page 4) into the groove on the underside of
the fan.
No. in
fig.
2
,
page 3
Description
1
Filter
2
Fan On/Off switch
3
Light On/Off switch
4
Halogen lamp
Summary of Contents for CK150
