EN
Operation
CDF
12
7
Operation
7.1
Before initial use
!
I
7.2
Saving energy
•
Choose a well ventilated location which is protected from direct sunlight.
•
Allow warm food to cool down first before placing it in the cooling device to
keep cool.
•
Do not open the cooling device more often than necessary.
•
Do not leave the cooling device open for longer than necessary.
3
ERROR
LED flashes red:
Device is switched on but not ready
for operation
4
SET
Selects the input mode
Temperature setting
Celsius or Fahrenheit display
Set battery monitor
5
–
Display, shows the information
The first three digits of the four-digit display show the
temperature, the fourth digit shows the temperature unit
(°C or °F).
6
ADJUST
Press once to decrease the value
After having reached the lowest value, the loop starts again
with the highest value.
WARNING! Fire hazard!
•
When positioning the device, ensure the supply cord is not trapped
or damaged.
•
Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the device.
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (please also
refer to the chapter “Cleaning and maintenance” on page 18).
Item Description
Explanation
DometicCDF18-26-36-46_OPM_4445102393_EMEA16_20xx-xx-xx.book Seite 12 Mittwoch, 22. Dezember 2021 2:24 14
