Dometic CDF-11, Operating Manual

Page: 15 / 248

EN
CoolFreeze CDF11 Operation
15
In “HIGH” mode, the battery monitor responds faster than at the levels “LOW” and
“MED” (see the following table).
This is how to select the battery monitor mode:
➤
Switch on the cooler.
➤
Press the “SET” button (fig.
2
4, page 3) three times.
➤
Use the “+” (fig.
2
6, page 3) and “–” (fig.
2
7, page 3) buttons to select the
battery monitor mode.
✓
The selected mode then appears in the display for a few seconds. The display
flashes several times before it returns to the current temperature.
I
Battery monitor mode LOW MED HIGH
Switch-off voltage at 12 V
10.1 V 11.4 V 11.8 V
Restart voltage at 12 V
11.1 V 12.2 V 12.6 V
Switch-off voltage at 24 V
21.5 V 24.1 V 24.6 V
Restart voltage at 24 V
23.0 V 25.3 V 26.2 V
NOTE
When the cooler is supplied by the starter battery, select the battery
monitor mode “HIGH”. If the cooler is connected to a supply battery,
the battery monitor mode “LOW” will suffice.
If you wish to operate the cooler from the AC mains, set the battery
monitor to the “LOW” position.
CDF11-O-16s.book Seite 15 Montag, 18. Mai 2020 1:42 13