MT iQ SolarPRO
Using the solar monitor
EN
15
8.2
Switching between the main displays
➤
Press the
button to switch between the main displays.
8.3
Resetting the solar charge counter
1. Press and hold the
button for 5 seconds to open the settings menu.
2. Press the
button until “RESET 0 Ah” is displayed.
3. Press and hold the
button until the progress indicator has scrolled through.
✔
“OK” is displayed.
✔
The settings are saved.
4. Press the
button or wait for 10 seconds to quit the menu.
The main display shows the actual solar charging current of the
solar system in A.
The main display shows the actual solar power in % in relation to the
maximum possible value.
The main display shows the actual voltage of the house battery in
V.*
The main display shows the total solar charge generated in Ah since
the last reset.
*Only available if the battery voltage measurement is activated, see chapter “Deactivating or activating the bat-
tery voltage display” on page 13.
Summary of Contents for BUTTNER MT iQ SolarPRO
Page 3: ...MT iQ SolarPRO 3 4 3 2 5 1 1 2 1 2...
Page 4: ...MT iQ SolarPRO 4 1 2 3 6 4 5 3 4...
Page 114: ......
Page 115: ......
