17
Installation in the car
• For the fixation of the refrigerator inside the car, use the provided belt set
consisting of 3 belts. Using these belts, the refrigerator is fixed to the fastening
eyelets inside the cargo compartment of the vehicle.
• The manufacturer recommends using an additional rubber mat. This mat is not
included in delivery.
Fixation in Ford Transit Connect
• Proceed as follows to fix the cool-container inside the Ford Transit Connect :
• Slide the container approximately halfway inside the cargo compartment.
• Fix the first belt
G1
with the shackle to the front left eyelet
in the cargo
compartment. Slide this belt trough the front left eyelet of the container
,
through the front belt guide
and through the front right eyelet of the container
to the front right eyelet
of the vehicle.
• The second belt
G2
is fixed with the shackle to the same eyelet
. This belt is
guided through the eyelets
and
of the container to the back of the cargo
compartment.
• Fix the third belt
G3
in the same way as belt
G1
on the opposite side of the
container : From eyelet
through eyelets
and
to the back of the
vehicle.
• Push the container into the cargo compartment just so far that the back doors of
the vehicle can be closed without difficulty.
• Fix the belts
G1
and
G3
using the ratchet spanners
R2
resp.
R3
to the eyelets
and
. As these two belts are serving as main fixation the spanners must be
strongly tightened.
• Now fix the belt
G2
to the eyelet
with the spanner R1. As this belt is serving
as guiding belt, the spanner must not be tightened too strongly.
• Regularly check the strain of the belts and tighten the spanners if necessary.
Summary of Contents for AC 8500
Page 2: ...2 ...
