Dometic 9600003262, Installation And Operating Manual

Page: 16 / 184

Using VT50WiFi VT50WiFi
EN
16
8 Using VT50WiFi
8.1 Installing the VT50 RearCam app
To be able to use the system, you need to install the manufacturer’s free app on your receiving
device before initial use.
You can find the app in Google Play Store™ (Android™) and in the App Store™ (iOS™) under the
name VT50 RearCam.
8.2 Putting VT50WiFi into operation
I
➤
Activate the wireless reception of your receiving device.
➤
Switch the vehicle ignition on.
➤
Engage the reverse gear of the vehicle.
✓
The transmitter is operational about six seconds after putting the vehicle into reverse gear. The
operating display (fig.
2
5page 3) lights up permanently in red on the transmitter.
➤
Connect your receiving device to the wireless network of the transmitter.
➤
Start the app on your receiving device.
✓
The receiving device displays the camera image.
9 Troubleshooting
NOTE
Change the name and password of the wireless network after you have connected
your receiving device for the first time.
Fault Cause Suggested remedy
The receiving device can-
not find the transmitter’s
wireless network. The transmitter does not
work. Check the power supply.
The transmitter’s operat-
ing display does not light
up.
The app on the receiving
device has a black
screen. The transmitter does not
work. Check whether the app responds:
Open the menu.
Check the transmitter connection and
function.
The receiving device cuts
off during image play-
back. The connection between
transmitter and receiving
device is too weak. Adjust the location of the transmitter by
a few centimetres.
VT50WiFi-IO-16s.book Seite 16 Freitag, 30. Juni 2017 11:04 11