EN
FreshJet
Installation
19
Remote light switch (not included in the scope of delivery)
You can connect the lighting to a remote light switch. This enables you to switch on
the lighting remotely.
To do this, proceed as follows:
➤
Disconnect the 2-pin plug (
3
) from the socket on the circuit board of the air outlet
unit.
➤
Connect the two cables of the remote light switch to the 2-pin plug (
3
).
➤
Insert the 2-pin plug (
3
) into socket on the circuit board.
12 V
g
cable
You can connect the lighting to the battery. This enables you to switch on the lighting
even if the 230 V
w
voltage supply is not connected.
To do this, proceed as follows:
➤
Disconnect the 2-pin plug (
4
) from the socket on the main board.
➤
Connect the positive cable (
5
) with the plug.
➤
Connect the negative cable (
6
) with the plug.
Connecting the circuit board
➤
Insert the 12-pin plug (
8
) in the socket (
7
) on the circuit board of the air outlet unit.
See fig.
c
➤
Choose the suitable seal in accordance with the following table:
➤
Position the seal with the adhesive side on the ADB.
➤
Fasten the fastening frame (
3
) on the underside of the roof air conditioner with
the 4 screws supplied.
Roof thickness
Seal type
25 – 30 mm
15 mm
30 – 40 mm
30 mm
40 – 60 mm
45 mm
FreshJet-ADB2015-I-16s.book Seite 19 Mittwoch, 8. März 2017 9:13 21
Summary of Contents for 9105306511
Page 6: ......
Page 203: ...DA FreshJet Tekniske data 199 Vægt ca 36 kg Godkendelse certifikat FreshJet 3200 ...
Page 321: ...PL FreshJet Dane techniczne 317 ...
Page 391: ......
