Rev 0-12 11 19
Fabriqué en Chine
Page 25
FILLING THE TANK
Unplug the unit from the power supply before handling the tank.
1. Using a Phillips screwdriver, remove
the security screw shown by the arrow
in the drawing above. Then gently lift the
tank by placing one hand on each side.
2. Turn the tank over and unscrew the
connector on the bottom.
3. Fill the tank with water. Screw on the
connector.
4. Replace the tank and reinsert it into
the humidifier. To prevent the tank from
being removed during operation, re
-
place the safety screw.
