ix Gamma
Assembly/Type 382
ix Gamma
35
Type 382
This chapter describes the assembly of the knurled pin and the lever.
You require: 1 appropriate reversible key, 1 lever (200013),
1 knurled pin (242081), 2 hexagon nuts for the core (201306),
1 hexagon nuts for the body (201320), 2 SW14 and SW30 fork spanners.
Note! You have already mounted the core in the filled body and removed
the key.
Ill. 35: Adjusting locking direction and in-
serting lever
1. Use the knurled pin to adjust the
closing direction which you require.
Closing to the right:
Insert the
knurled pin in the upper vertical
borehole.
Closing to the left:
Looking at the
DOM logo, you must insert the
knurled pin on the left-hand side.
2. Push the lever in the required posi-
tion onto the cylinder core at the rear
side.
Ill. 36: Fixing and securing the lever
3. Use an SW14 hexagon nut to fix the
lever (by hand).
4. Secure the hexagon nut with an-
other SW14 hexagon nut (by hand).
