background image

Instruction Manual

Digital Electronic Combination Lock

Locking/Unlocking

To Unlock

1.  Enter factory default passcode 1234 + 

OK

OK

 or enter factory default Management Passcode 4321 + 

OK

OK

.

2.  Long beep will sound.

3.  Green indicator light       will come on

4.  Rotate the knob 90

°

 within 3 seconds to open the lock. If the wrong passcode is entered, a beep will sound 3 times.

5.  If lock shows red light       this indicates low battery level.

NOTE: When entering Management Passcode to unlock, user passcode will be changed back to default 1234.

To Lock

1.  Rotate the knob back to lock position.

1.  Change passcode

1.   Enter current User Pa 

OK

OK

, or Management Pa 

OK 

OK 

. Long beep will sound and       will be 

 displayed.

2. Press 

OK

OK

 for at least 2 seconds, then       will flash.

3.  Input new passcode, press 

OK

OK

. When you hear a long beep passcode has been changed.

NOTE: 

Passcode can consist of 4-15 digits. Management Passcode and User Passcode can not be the same code.

2.  Turn on public mode, set temporary password

1.  Enter current Management Pa

OK 

OK 

, a long beep will sound and Unlocking indicator light       will be  

 displayed

2. Press 

OK

OK

 for at least 2 seconds, Unlocking indicator light       will flash. Press 

OK

OK

 again.

3.   Input “4 4” and press 

OK

OK

. When you hear a long beep public mode has been set.   

‘Unlocked’ indicator light

KEYPAD

BATTERY COMPARTMENT

USB KEY INTERFACE

‘Low power’ indicator light

HOW TO OPERATE

Page 1

SETTINGS

Part No. 60117

Reviews: