24743411
1
Change handing if required (see instructions on next page).
2
Install cylinder (L lever control only).
Mortise cylinder with
standard straight cam
in position shown with
key removed
Cylinder collar
Lock
nut
3
Install tailpiece. Consult factory for doors other than 1-3/4” or
2-1/4” thick.
Pine tree clip
Tailpiece
Use this hole for
2-1/4" thick door
Use this hole for
1-3/4" thick door
4
Install tailpiece guide in exit device cam.
Tailpiece guide
Exit device cam
5
Prepare door for lever control installation.
1.
Center lines correspond
to center lines on exit
device instructions.
2.
See exit device
instructions for cutouts
on inside of door.
NOTES
!
5/8”
5/8” diameter
3/8” dia.
4 places
1-11/16”
1-1/4”
CL
1-11/16”
CL
6
Install lever control.
LHR RHR
!
NOTE:
See exit device
instructions for
additional information.
Lever Control
230L/L-BE
Installation Instructions
