THE ATTACHMENT SYSTEM MUST
ALWAYS BE USED IN CO-SLEEPER MODE.
• BEFORE EVERY USE, CHECK TO MAKE SURE THAT THERE IS
NO SPACE BETWEEN THE ADULT MATTRESS AND THE SIDE
OF THE CO-SLEEPER. IF THERE IS, PULL THE BELTS FIRMLY
TO TIGHTEN UNTIL THERE’S NO SPACE.
• USE OF PRODUCT IS ONLY PERMITTED WITH BEDS AND/OR
MATTRESSES WITH STRAIGHT SIDES. DO NOT USE PRODUCT
WITH A ROUND MATTRESS OR A WATER BED.
• WHEN THE PRODUCT IS USED IN THE CO-SLEEPER MODE, IT
SHOULD ALWAYS BE FITTED TO THE LONG SIDE OF THE BED.
DO NOT FIX THE PRODUCT TO THE SHORT SIDE OF THE BED.
CARE & CLEANING
Remove the cover:
1. Remove the mattress and release the velcro tabs from the
middle support frame on the underside of the bedside
sleeper.
2. Unzip the zipper underneath the fabric lip on the upper frame.
Pull out the removable fabric lining (E) from the upper frame.
Pay attention not to damage the internal lining.