·
Always read and follow assembly instructions for each
product use (co-sleeper or bassinet).
·
Please use ALL required parts for each use (co-sleeper or
bassinet).
FALL HAZARD:
·
To help prevent falls, do not use this product when the infant
begi
ns to push up on hands and knees, can roll over, or has
reached 20lbs, whichever comes first.
·
Please use all required parts for each use (co-sleeper or
bassinet).
·
Check instruction manual for a list of required parts.
·
Periodically check product for loose, damaged, or missing
parts. DO NOT use product if any part is loose or missing, or if
there are any signs of damage. DO NOT substitute parts.
·
Contact
Dream On Me
if replacement parts or instructions are
needed.
·
In Bassinet Mode, make sure that side panel is locked.
·
Strings can cause strangulation. NEVER place product near
window blinds or patio doors with cords where a child could
reach the cord and be strangled, or hang strings over the
product or place items with a string around an infant's neck
or
attach strings to toys.
·
DO NOT place any cord or strap or similar items in or near
this
product that could become wrapped around a child's
neck.
·
Strings can cause strangulation. DO NOT place anything with
a string around a child's neck, such as hood strings or pacifier
cords. DO NOT suspend strings over a bassinet or cradle or
attach strings to toys.
SUFFOCATION, ENTRAPMENT
AND FALL HAZARDS:
·
To use bassinet mode,
ALWAYS raise
the
side with
the
zipper
to completely close up all 4 sides.
·ALWAYS push adult mattress against beside sleeper after
securing to bed with safety strap and anchor plates.
·NEVER leave infant in bassinet with
the
sides down.
·The
co-
sleeper is designed for use only with adult beds
that are
between 18.5 - 24 inches (47 - 60 cm) from floor to top of
adult
mattress.
·The anchor plate
s
and straps assembly must always be used in
co-
sleeper mode. Product in
co-
sleeper mode must be
tightly
attached to adult bed mattress to ensure safe use.
·It is recommended to make the strap
s
shorter than the width of
the mattress to ensure
co-
sleeper is pressed securely
and tightly
against the adult bed, without any gaps.
·A bedside sleeper is designed to provide a sleeping area for an
infant until he or she begins to push up on hands and knees or
can roll over, or has reached 20lbs, whichever comes first.
Move
your child to another sleeping
product when your child reaches
this stage.
NEVER USE THIS PRODUCT IN CO-
SLEEPER
MODE WITHOUT THE
ANCHOR PLATES
SECURELY
ATTACHED TO THE ADULT
BE
D
ACCEPTABLE BED
FRAME IN-LINE
UNACCEPTABLE BED,
MATTRESS, BOXSPRING
&
FRAME NOT IN-LINE
MATTRESS, BOXSPRINGS
&
FRANE ALIGNED
FRAME
EXTENDED