7. Open up the Bassinet Frame as shown
in Figure 8 (to the right). Keep the
bassinet frame upside down for the
following step.
Figure 8
Figure 9
MAKE SURE that the center plastic holder
faces up as shown in Figure 10.
If the mattress support bottom frame is
assembled in the wrong direction, it can not
match the Upper Pole (see next step).
Figure 10
UPPER FRAME ASSEMBLY
Parts used in this stage
Bassinet Frame
Upper Pole
Mattress support
,
bottom frame
Screw x4
Screw Driver
Face up
5
9. Use the 4 remaining screws to connect
the mattress support bottom frame to the
bassinet frame as shown in Figure 10.
8. Place the Mattress Support Bottom
Frame on the ends of the legs of the
bassinet frame. Make sure that the 4 ends
click into place as shown in Figure 9.
