4. Use 4 screws, the 4 lock nuts, and
the metal plate to connect the Lower
Pole to the X-shape bottom tubes as
shown in Figure 5.
Use the wrench to tighten 4 screws.
5. Slide the Bottom Tray onto the Lower
Pole as shown in Figure 6.
Make sure that the bottom tray makes
contact with the X-shape bottom tubes.
Push slightly on all 4 corners of the
bottom tray.
6. Place the Height Adjuster on the top of
Lower Post.
Push in the side button on and then slide
the height adjuster down until it clicks into
place as shown in Figure 7.
Make sure that the adjuster button is
located on the same side as the upper
hole as shown in Figure 7A
LOWER FRAME ASSEMBLY
Metal Plate
Lock Nut
1. Push in
2. Slide
Down
4
Figure
7
Figure
6
Figure
5
Figure 7
A
Incorrect
Correct
