Dolphin Hybrid RS1, Operating Instructions Manual

Page: 9 / 44

Dolphin Hybrid RS 1 - Suction Pool Cleaner
| Operating Instructions
7
❙ ❙
Removal from the Pool and Storage
When you choose to remove the
Dolphin Hybrid Cleaner from the
pool:
1 Ensure to switch the pool
pump
OFF .
2 Disconnect the Skimmer
Adapter from the suction line
opening.
3 Disconnect the Safety Valve.
4 Disconnect the Hose Sections,
pulling them slowly one-by-
one out of the pool.
5 When you reach the section
connected to the
Dolphin
Hybrid Cleaner
, grasp the
Dolphin Hybrid Cleaner handle
and remove the Dolphin Hybrid Cleaner from the pool
(Drawing J) .
CAUTION
Remove the Dolphin Hybrid Cleaner from the pool only by its handle!
6
Store the
Dolphin Hybrid Cleaner
and Hose Sections
out of direct sunlight. Do not store the
Dolphin Hybrid
Cleaner
where it will be exposed to excessive heat or
frost. Make sure that Hose Sections are in a straight
position
(Drawing K) .
7 For longer life of the equipment, it is recommended
to rinse the
Dolphin Hybrid Cleaner
and parts with tap
water.
8 Reopen all skimmers.
❙ ❙
Troubleshooting
The Dolphin Hybrid Cleaner is designed to operate with a minimum of user maintenance.
If a problem does occur, try to determine the cause. Often, the solution is already part of the
standard operating instructions in this booklet. If you cannot solve the problem easily, contact your
supplier.
K
J