1. Press
2. Enter the “Master Code” (default is )
3. Press the button
4. Enter for change code
5. Enter for the number of user code (eg. “03” for the third user code, etc).
6. Enter the new “User Enter Code” (Must be 4 digits)
7. Press the button. The multi-color status LED flashes Green 3 times meaning
the code is accepted. If the multi-color status LED flashes 3 times Red, the
steps need to be repeated.
STEP 5:
Programming the User Entry Code
1
1
*
*
4
3
2
0 1
1. Press
2. Enter the “Master Code” (default is )
3. Press the button
4. Enter for delete code
5. Enter for the number of user code (eg. “03” for the third user code, etc).
6. Press the button. The multi-color status LED flashes Green 3 times meaning
the code is accepted. If the multi-color status LED flashes 3 times Red, the
steps need to be repeated.
STEP 6:
Deleting the programmed User Entry Code
1
2
*
*
4
3
2
0 1
1. Disconnect the power by removing the battery.
2. Press the , , and keys simultaneously.
3. Re-connect the battery to power up the keypad.
4. Release the , , and keys.
Note: The keypad is returned to the default “Master Code” . And all User
Entry Codes are deleted.
1
4
3
2
1
4
7
1
4
7
Return to Default Settings
DOLKWP300318 OPERATION
ORANGE - Key depress
GREEN - Code was entered correctly and the keypad is transmitting
GREEN - Programming Mode
RED - (Flashing 3 times) Error was made in either programming mode or in
code entry.
Multi-color status LED
1. Press
2. Enter your programmed usercode.
STEP 7:
Activating the Keypad
