Filter cleaning instructions
The system is provided with one stainless steel filter preventing foreign particles
to enter the lines. If the water flow has decreased, this may be because the filter is
clogged. The filter can be cleaned as follows:
1. Shut-off the water shut off valve.
2. Disconnect the flexible pipe.
3. Remove the filter and wash it under running water.
4. Reassemble the parts.
5. Reconnect the flexible pipe and restore the incoming water supply.
6. Make sure that there is no water leakage.
Care and cleaning of the sensor unit surface
DO NOT use steel wool or cleansing agents containing alcohol, acid, abrasives, or
the like. Use of any prohibited cleaning or maintenance products or substances
could damage the surface of the sensor unit. For surface cleaning of the sensor unit
use ONLY soap and water, then wipe dry with clean cloth or towel. When cleaning
bathroom tile, the unit should be protected from any splattering of harsh cleansers.
MAINTENANCE
12
|
Dolphin
|
DB620 / DB 625
