!
11
MOUNTING OF PROTECTOR
To meet the applicable safety provisions, only the tool/protector combinations
as indicated in the table must be used.
Be sure to use genuine DOLMAR cutter blades or nylon cutting head.
–
The cutter blade must be well polished, free of cracks or breakage. If the cutter blade hits against a stone during operation, stop the engine
and check the blade immediately.
–
Polish or replace the cutter blade every three hours of operation.
–
The outside diameter of the cutter blade must be 230mm (9-1/16"). Never use any blades surpassing 230mm (9-1/16") in outside diameter.
!
Star Blade
Eddy Blade
Protector for metal blades
Nylon cutting head
Protector for cord cutter
!
CAUTION: The appropriate protector must always be installed, for your own safety and in order to comply with accident-prevention regulations.
Operation of the equipment without the guard being in place is not permitted.
!
!
–
Fix the protector (1) to the clamp (3) with two bolts M6 x 30 (2).
!
!
–
When using the string head, fit the protector (6) into the protector (1), and
tighten them with two nuts (5) and two screws (4).
!
!
(6)
(5)
(4)
(1)
Summary of Contents for MS-22C
Page 110: ... 110 ...
Page 111: ... 111 ...
Page 112: ...885158A915 KOW DOLMAR GmbH Postfach 70 04 20 D 22004 Hamburg Germany http www dolmar com ...