4
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbol
END018-1
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
....................... Take particular care and attention.
.......... Read instruction manual.
...................... Do not expose to moisture.
............... Only for EU countries
Do not dispose of electric equipment
or battery pack together with
household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and
waste batteries and accumulators
and their implementation in
accordance with national laws,
electric equipment and battery pack
that have reached the end of their life
must be collected separately and
returned to an environmentally
compatible recycling facility.
General Power Tool Safety
Warnings
GEA010-1
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
IMPORTANT SAFETY
INSTRUCTIONS
ENC007-7
FOR BATTERY CARTRIDGE
1.
Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product using
battery.
2.
Do not disassemble battery cartridge.
3.
If operating time has become excessively shorter,
stop operating immediately. It may result in a risk
of overheating, possible burns and even an
explosion.
4.
If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5.
Do not short the battery cartridge:
1.
Battery cartridge
2.
Indicator lamp
3.
Switch trigger
4.
Hanger (suspension point)
5.
Grip
6.
Barrier *
7.
Shoulder harness
8.
Buckle
9.
Joint
10. Red indicator
11. Button
12. Lock-off button
13. Reversing switch
14. A position depressed for normal
operation
15. B position depressed for weed
and debris removal
16. Speed change switch lever
17. Indicator lamps
18. CHECK button
19. Clamp
20. Spacer
21. Lock lever
22. Pin
23. Arrow mark
24. Release button
* In some countries, the barrier is not provided with the tool.
Model
BUX360, BUX361, BUX362,
UX360D, UX361D, UX362D
No load speed
(with brushcutter attachment EM401MP and nylon cutting head)
High
0 - 6,600 min
-1
Low
0 - 4,900 min
-1
Overall length
1,019 mm
Net weight
4.6 kg
Rated voltage
D.C. 36 V
Standard battery cartridge(s)
Warning: Use only the battery cartridge(s) described.
BL3626, BL3622A
Cd
Ni-MH
Li-ion
