17/23
Dolezych
-
Original operating instructions
3.
Execute a rough shortening by hanging the lashing chain in the shortening
hooks. Make sure that the chain is hooked in as tightly as possible! Make
sure that the chain is correctly hooked into the shortening elements.
CAUTION!
Risk of injury due to failure of the lashing equipment!
When shortening the textile chain, the lashing system is only
as strong as the weakest element used.
To calculate the LC of the lashing system, always use the
LC of the weakest element.
Only use approved shorteners (e. g. shackles).
NOTE! To avoid damage to the textile chain, only fittings approved
by Dolezych GmbH may be hooked into the chain links!
In the case of shortening hooks, care must be taken to ensure that
the hook base is not damaged (e. g. grooves or burrs). Such damage
can cut or otherwise damage the textile chain.
The DoRa ratchet load binder and the associated shortening hooks
are approved for use with the DoNova® PowerLash.
When shortening the DoNova® PowerLash, the following points must be
observed:
There must be at least three free chain links
between two fittings.
