Configurable Safety System SAFEMASTER PRO
90
0265525 / 16.05.19 en / 101A
LEVEL 1 PASSWORD
LEVEL 2 PASSWORD
PASSWORD PROTECTION
All operators using the UG 6911.10 system must have a Level 1 PASSWORD.
This Password allows only to view the LOG file, composition of the system and MONITOR in real time.
The first time the system is initialized the operator must use the password "" (ENTER key).
Designers who know the level 2 password can enter a new level 1 password (alphanumerical, max 8 characters).
Designers authorized to work on the creation of the project must know a Level 2 PASSWORD. The first time the
system is initialized the operator must use the password "SAFEPASS" (all capital letters).
Designers who know the level 2 password can enter a new level 2 password (alphanumerical, max 8 characters).
The SAFEMASTER PRO DESIGNER requests a password in order to upload and save the project.
Operators who know this password
are not enabled
to upload, modify or save the project
This password enables the project to be uploaded, modified and saved. In other words, it allows total
control of the PC
→
SAFEMASTER PRO system. When a new project is UPLOADED the level 2 password
could be changed.
Should you forget either of these passwords, please contact DOLD which will provide an unlock file. When
this file is saved in the directory in which the SAFEMASTER PRO DESIGNER software is installed, the
following icon
appears in the standard tool bar.
Now it is possible to restore the original password "" and "SAFEPASS" in the control unit, (the control unit
must be switched on and connected to the PC).
This procedure can only be done once for every control unit.
For a second reset the control unit has to be sent back to the manufacturer
PASSWORD CHANGE
To activate the PASSWORD Change use icon
, after connecting with Level 2 Password.
A window appears allowing the choice of the new password; insert the old and new passwords in the appropriate
fields (max 8 characters). Click OK.
At the end of the operation disconnect to restart the system.
If memory card OA 6911 is present the new password is also saved in it.
