Dolby Laboratories iMeet, Configuration Manual

Page: 24 / 31

Table 1: Configuration parameters required for iMeet (continued)
Parameter name Setting Task
Dvms.Service.Type
Select the
conferencing service
provider application
type. Set this
parameter to
App .
From Dolby Conferencing Console:
1. From Dolby Conferencing Console, select a
device and then click the Edit device
configuration button.
2. From Dolby Voice Conferencing Service >
Service , drag Application type to the device
configuration.
3. In the Dvms.Service.Type field, select App .
From the phone web interface:
1. Navigate to Settings > Dolby Voice
Conferencing Service > Service .
2. In the Application type field, select App .
Features.OperationMo
de
Set this parameter to
Conferencing Only
Mode
or Dual Mode .
For more information
about the differences
in these operations
modes, see
Configuring the
operational mode
on
page 12.
From Dolby Conferencing Console:
1. From Dolby Conferencing Console, select a
device and then click the Edit device
configuration button.
2. From Features , drag Operation Mode to
the device configuration.
3. In the Features.OperationMode field, select
Conferencing Only Mode or Dual Mode .
From the phone web interface:
1. Navigate to Settings > Features .
2. In the Operation Mode drop-down list,
select Conferencing Only Mode or Dual
Mode .
Results
You are ready to start hosting and joining iMeet meetings from the phone. For more
information, see
Dolby Conference Phone User's Guide for iMeet .
Note: If you are using version 3.0.0 or 3.0.1 firmware, see Known issue with v3.0.0 and 3.0.1
firmware on page 24. Some additional steps are still required.
3.2 Known issue with v3.0.0 and 3.0.1 firmware
There is a known firmware issue in version 3.0.0 and 3.0.1 of the Dolby Conference Phone that
causes iMeet meetings to fail to start.
In this situation, after the phone reboots, the first iMeet calls fails. A Connecting to User's
meeting message displays, the LED halo turns blue, and then a time-out error displays saying
the call cannot be completed. After three calls, all subsequent calls work normally.
To workaround this issue, change the configuration parameters as listed in this table.
Configuring iMeet
Dolby Conference Phone version 4.1 Configuration Guide for iMeet
5 October 2018
24