Prerequisites
You must have a network-connected desktop or laptop computer with a web browser
supporting HTML5 installed. (Modern versions of Internet Explorer, Firefox, Chrome, and Safari
are supported.)
The web browser will be used to configure the phone, so it must have IP network connectivity to
the Dolby Conference Phone.
Procedure
1. From the phone home screen, tap this sequence:
>
>
About
>
General
2. Scroll down until you see the IP address.
3. Enter this URL in the browser address bar.
If a security warning displays, accept the warning and proceed.
https://your phone IP address
4. Log in to the Dolby Conference Phone using the default credentials:
•
Username
=
admin
•
Password
=
1739
2.4 Configuring the operational mode
You can configure the Dolby Conference Phone for either Conferencing mode or Dual mode.
About this task
Conferencing mode
Use if you plan on using your phone with the iMeet only.
Configuration procedures
Dolby Conference Phone version 4.1 Configuration Guide for iMeet
5 October 2018
12
