Dolby Laboratories CP750, Manual

Page: 30 / 85

18 Dolby
®
CP750 Digital Cinema Processor Manual
Installing, Launching, and Connecting the Setup Software
We recommend running the installer as an administrator. If you run the installer without
administrative privileges, you will not be able to connect to the CP750 via USB. The
installer generates the warning shown in Figure 3 ‐ 2 ..
Figure 3 ‐ 2
Figure 3-2 Running the Installer Without Administrator Privileges
3.3 Connecting the Hardware
There are three ways to connect computer hardware to the CP750.
• The USB port on the front panel of the unit, shown in Figure 1 ‐ 1 , is expressly designed
for easy connection to laptop computers with a standard A to B cable.
• You can connect directly to the
Ethernet
connector on the unit rear panel. If your
laptop supports Gigabit Ethernet, use a standard Ethernet cable. Otherwise, use a
crossover cable.
• You can connect a pin ‐ to ‐ pin serial cable to the
RS-232
connector on the unit rear
panel.
3.4 Launching the Setup Application
To launch the CP750 setup application, click the Start button and scroll to Programs . In the
Dolby folder, double ‐ click Dolby CP750 Setup .
The Dolby ® CP750 setup window appears, as shown in Figure 4 ‐ 1 .
3.5 Connecting to a Local or Remote Device
You can use the setup software
Action
menu, shown in Figure 3 ‐ 3 , to connect to a local or a
remote device.