About this task
The Dolby IMS has a charging LED to indicate when it is charging and when it is fully charged. The Docking
Station has a rectangular cutout that enables you to view the charging LED on the Dolby IMS.
While the Dolby IMS is charging, its green LED battery indicator steadily illuminates. The LED turns off when
the Dolby IMS is fully charged. It can take up to 48 hours for the battery of the Dolby IMS to fully charge.
Procedure
1.
Insert the Dolby IMS into the Docking Station using the guide rails.
This should be similar to inserting a Dolby IMS into the Series II slot in a projector. If you feel any unusual
resistance, stop and inspect the Docking Station or the Dolby IMS for any issues.
2.
On the rear panel, press the power switch labeled
POWER
to the on position.
3.
Confirm that the Dolby IMS is charging by viewing the LED indicator.
Figure 6: Charging LED indicator
4.
After charging is complete and the LED on the Dolby IMS stops illuminating green, turn off the Docking
Station using the power switch and remove the Dolby IMS.
Installing the Dolby IMS Docking Station
Dolby Integrated Media Server Docking Station Manual IMS.OM.005903.DRM Issue 3
14
23 June 2020
