Quick Reference Guide CLK-4
DOKKi
.eu
POSITIONING
The CLK-4 has rubber feet on the bottom and can be used on a flat surface. Please make sure the CLK-4 is positioned on a flat surface
which is level.
POWER AND CONNECTION
Plug the power adapter cable into the wall outlet
and the other end of the connector in the back
power connection of the CLK-4.
The CLK-4 is now ready for use.
CLK-4 USAGE SAMPLES
•
CHARGE ONLY
You can use the CLK-4 as a 'charge only dock'.
•
COMMUNICATION AND CHARGING (MIXED)
You can also connect your terminal to the PC using the CLK-4. For this connect the CLK-4 with an appropriate USB cable to a
PC. Be aware that the cradle itself doesn't create it's own random Virtual Com Port (VCP)! (*1)
DRIVER INSTALLATION FOR COMMUNICATION WITH PC – depending on usage
The DOKKi.eu CLK-4 docking station itself does not need a separate driver. The only driver that needs to be installed on your
PC is the appropriate driver for your scanner model and designated type of usage. If not already done so, please follow the
instructions for driver installation in the corresponding manual that belongs to your scanner model.
(*1) When used in Mass Storage Device mode no driver installation is necessary.
DOCKING YOUR SCANNER
Take the scanner in your hand with the display up and facing towards yourself. Hold it
with the front side at the same angle as the front-plate of the CLK-4. Make sure the
handstrap points to the right so it can slide through the right side opening. Now put the
backside (at battery height) against the back-plate of the CLK-4 and let the scanner slide
down towards the USB connector. Make sure you feel the USB connectors make proper
contact and then gently press the scanner down into its place.
Press firmly but never use excessive force when pressing down as this
might damage the connectors!
Always check for obstructions on both connectors before trying to
dock the scanner.
ACCESSORIES
•
none at the moment
Check for available accessories on our website.
DOKKi.eu is a trademark of JNC Service B.V. ('JNC'). Copyright JNC Service B.V. All rights reserved.
CLK-4_QRG-001 / August 2014
CLK-4 back
