User Information
Dokaflex
30
tec
25
999803902 - 06/2014
Secondary-beam stabilisers
Secondary-beam stabilisers are used to prevent form-
work beams tipping over while panels are being laid on
them.
Advantages:
▪
Special claws to prevent slippage on the beam-
flange
▪
No work-platform scaffold needed, as the stabilisers
can be mounted/dismounted from ground level using
an Alu beam fork H20
▪
Needs only small commissioning quantities, as the
Secondary-beam stabilisers can be re-set in tandem
with the formwork erection cycle:
- approx. 20 Secondary-beam stabilisers 1
- approx. 10 Secondary-beam stabilisers 2
Note:
In certain special situations, (e.g. when forming inclined
floor-slabs), Secondary-beam stabilisers can also be
used for transferring horizontal loads.
For more information, please contact your Doka techni-
cian.
How to mount:
➤
Hang the Secondary-beam stabilisers into place with
an Alu beam fork H20.
The secondary beam is now held in place.
➤
Lay the ProFrame panels on the beams.
➤
After the formwork sheets have been laid, unhook
and remove the Secondary-beam stabilisers with an
Alu beam fork H20.
Secondary-beam stabiliser 1
Secondary-beam stabiliser 2
98039-217-01
98039-217-02
98039-212-01