12
Please note:
Normally you would expect
to flash again. Exceptio-
nally here it does not. In case of pressing
by mistake you would
delete your just finished calibration and start again. So for safety
reason after calibration is finished you directly access the calibration
reminder function.
5.6 Calibration Reminder (de)activation
The factory presetting is an activated visual calibration reminder alarm.
If you want to keep it, press
for 3 seconds while
,
and are
flashing. You return to operating mode.
To deactivate the reminder press
briefly while
,
and are
flashing. Use the
and
buttons to change into
and acknowledge
with
.
When finished,
,
and
will flash again.
If you want to finish programming, press and hold
for 3 seconds until
the display returns to operating mode.
