narrow a range allowing your pet too close to the boundary area
before receiving a warning.
■
Never adjust the transmitter while your pet is wearing the receiver
collar.
Boundary Wire
■
Check to see if the transmitter is “on”.
■
If you have a broken boundary wire the green light will be red.
Batteries
For replacement batteries and collars, see your authorized
DogWatch Dealer, visit our web site at www.dogwatch.com or
contact us at 800-793-3436.
IMPORTANT:
The use of batteries
other than those authorized by DogWatch Inc. can cause erratic
operation of the receiver or could cause permanent damage. The
use of unauthorized batteries will void the warranty on the receiver.
WARRANTY
DogWatch Inc., subject to the terms and conditions set forth
hereunder, hereby warrants that it will repair or replace, at its own
discretion, without charge for parts or labor, the Product or any part
thereof which is found by DogWatch Inc. to be defective by reason
of improper workmanship and/or materials for a period of one (1)
year from the original date of sale hereunder. Warranty claims may
be subject to dealer service charges and/or manufacturer shipping
and handling charges. EXCEPT FOR THE EXPRESS WARRANTY
STATED ABOVE, DOGWATCH INC. DISCLAIMS ALL EXPRESS
AND IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. As a condition to this warranty,
Customer must (a) mail the warranty card provided with the product
to DogWatch Inc., 10 Michigan Drive, Natick, MA 01760, (800) 793-
3436, within seven (7) days after purchase hereunder, (b) notify
DogWatch Inc. within one (1) year after the purchase hereunder of a
claimed defect, and (c) mail product back, insurance and postage
prepaid to the authorized DogWatch dealer or DogWatch Inc.
DOGWATCH INC.’S SOLE LIABILITY UNDER THIS WARRANTY
SHALL BE TO REPAIR OR REPLACE, AT ITS OPTION, ANY
PRODUCT OR PART WHICH DOGWATCH INC. DETERMINES TO
7
■
Your pet will quickly learn not to go near the boundary areas. Each
time you set up a new boundary area, be sure to retrain your pet.
Troubleshooting
Receiver
■
Check to see if the transmitter is “on”.
■
Take the receiver off the dog and check the receiver by placing
the test light on the contact posts and holding the receiver next to
the transmitter or boundary wire.
■
Ensure that the contact points on the receiver collar actually
touch your pet’s skin; tighten the collar as required.
■
Replace the battery if necessary.
■
Be sure the battery is inserted correctly.
Transmitter
■
Check to see if the power is “on” and that there is a green light.
If the boundary wire is broken, the light will be red.
■
Make sure that the power supply transformer is securely plugged
into the wall outlet and that both the power supply plug and the
boundary wire are connected to the transmitter.
■
Adjust the Range or the distance of the boundary with the
high/low switch (left side) on the back of
Scoot
. You may have too
6
Figure 3
Signal Field or
Boundary Area
Hidden
Scoot
TM
Transmitter
Boundary
Flags
