background image

15

Short pulse

 (hold the button pressed down for 1 second at the most)

  Use this function to correct the behaviour of your dog.

 Short pulses are usually used at a later stage of the training after the dog has already been trained 

with long impulses.

 Here, higher pulses are used compared to training with permanent impulses.

Tips

With the Dogtrace collars it is extremely easy and quick to teach the dog:

 To walk along without a dog-lead.

 To be called in reliably (”To me“, ”Come to me“ commands).

 To interrupt an inappropriate activity (”Fie“, ”You mustn’t“).

 To unteach bad habits during daily coexistence with people, such as taking food from the table, 

jumping at people, pawing, undesirable barking, etc

 Precise training of virtually every skill whereas the dog must do it precisely and reliably as if it were 

on a lead (

as many as hundreds of meters long!

) – with the removal of the undesirable dependence 

on the lead which the dog knows very well and adapts its behaviour to it.

 To unteach it chasing animals and running away from its master in the country – and thus being 

exposed to problems and risks related to them, so this solution  brings your dog more freedom who 

can now move freely also across the patches where otherwise it would not be either possible or it 

would be dangerous.

 Special activities and commands for business, hunting, sports or other training.

 Using it directly during hunting for communication with the dog.

 A series of other activities and applications which the owner of this unit will soon discover in daily 

common life with his/her dog.

Summary of Contents for d-control easy




















Reviews: