16
1. Attach the charging cables to both the transmitter and
receiver(s), as shown on page 15.
2. Plug the charger into a 120-volt wall outlet or if using
WKHDFFHVVRU\¿HOGFKDUJHUSOXJLQWRDFLJDUHWWHOLJKWHU
only for Lithium-Polymer batteries (use a 230-volt
European charger for Europe.). When properly plugged
in, all indicator lights should glow red. During the
FKDUJLQJSURFHVVWKHXQLWZLOOVKXWRII2QFHWKHEDWWHU\
cable is unplugged from the unit after a full charge,
you will need to turn the unit on again before use.
3. The Lithium-Polymer battery is fully charged within
2 hours. The lights will stay red during the charging
process. The red light will change into a steady green light
when the battery is fully charged (when you disconnect
WKHFKDUJHUDIWHU¿QLVKLQJWKHFKDUJH\RXZLOOQHHGWR
restart the unit).
4. After charging, cover the battery charging receptacles
ZLWKWKHUXEEHUSOXJVRQWKHWUDQVPLWWHUDQGUHFHLYHU
collar.
NOTE :
2QO\XVH'RJWUDDSSURYHGEDWWHULHVFKDUJHUVDQG
accessories for your Dogtra e-collars. When a charger is not
in use, disconnect it from the power source.
8. How to change the stimulation intensity
The Dogtra ARC has a rheostat intensity dial on the top
of the transmitter (0 is the lowest and 127 is the highest).
5HPHPEHUWKDW\RXZLOOQHHGWRDGMXVWWKHVHWWLQJXSZDUG
or downward) depending on your dog’s temperament
and threshold for stimulation. Also, as the dog’s attitude
changes, especially during times of increased excitement
or
GLVWUDFWLRQ\RXPLJKWQHHGWRDGMXVWWKHLQWHQVLW\OHYHO
NOTE :
7KHVWLPXODWLRQLQWHQVLW\FDQEHDGMXVWHGHYHQ
while the stimulation is in use.
