STEP 1
STEP 2
STEP 3
STEP 4
KEEP
DOGIPOT
®
CRATE CLEAN FOR A HEALTHY PET
STEP 5
STEP 6
Connect the Front Panel with a Side
Wall Panel using (1) Long Thumb
Screw.
(For 1702-L ONLY) Install the Floor
Support Bar by pressing the metal bar
into the plastic brackets pre-installed
on he side Panels.
Install the Floor Panel.
Attach the second Side Wall Panel
to the Front Panel with (1) Long
Thumb Screw.
Attach the Back Panel with the Side
Wall Panels with (2) Long Thumb
Screws, one on each side.
It is very important to keep the crate clean for the health of your pet.
The non-absorbent material and the easy-to-assemble design will be
appreciated when it is time to clean the
DOGIPOT
®
Pet Crate.
Remove the Table Top by reversing Step 6 of the assembly instructions,
which will allow you complete access to the entire inside of the
DOGIPOT
®
Pet Crate.
For a quick cleaning, simply wipe the inside and outside of the
DOGIPOT
®
Pet Crate with a damp sponge or cloth.
When a deep cleaning is necessary, we recommend using a detergent
with strong grease cutting capabilities that is safe to use around you,
your children and your pets. When deep cleaning is finished, rinse off the
entire
DOGIPOT
®
Pet Crate with a garden hose. Allow the interior to dry
thoroughly before reassembling the Table Top. We recommend a deep
cleaning twice a year to keep the crate clean and your pet healthy.
(A)
(For 1702-L ONLY) Insert the
Side Wall Pin into the bracket
pre-installed on the upper edge
of the Side Wall Panel.
(B)
Place
the Table Top in place and secure
with (4) Short Thumb Screws, one
on each corner.
