background image

Important notice

  The electronic training collars d-control are intended only to train animals. They 

     are not intended to harm, injure or to cause fear.

 Do not use the electronic training collars for dogs with health problems (e.g. 

     heart disease, epilepsy, etc.) or for dogs with behavioral disorders (aggressive 

   dogs etc).

  The collar should never be worn for more than 12 hours a day. Long-term effect 

     of contact points on the dog’s skin can cause skin irritation. If a rash or sore skin is 

     found, do not use the collar until it has healed.

   Never connect a leash to the electronic collar; this could cause excessive pressure 

     on the contact points or mechanical damage of the receiver. 

   In case of any problems or for further advice do not hesitate to contact a professional

       trainer.

  Do not place the transmitter close to objects  which are sensitive to magnetic 

     field, this could cause a permanent damage.

   Receiver and transmitter batteries need to be replaced every two years, even if 

     the kit has not been used. Never leave flat batteries inside of the device - it could 

     damage your device.

 The person with a personal instrument to support heart activity (pacemaker, 

     defibrillator) must respect the relevant precautionary measures. The d-control 

     professional emits a certain stationary magnetic field.

ECMA

VNT electronics s.r.o.

, professional producer of the dog training equipment, which 

is manufactured and sold under the brand name Dogtrace, is a proud and active 

member of the 

Electronic Collar Manufacturers Association.

ECMA

 was founded in Brussels in 2004 as a result of increasing awareness from 

different manufacturers concerning the necessity of regulating their industry. The 

main target of the association is to develop and produce reliable training systems 

of high quality, which are safe for the animals and improve the communication 

between pets and their owners. All members of the ECMA provide you with both 

technical and training guides that contain instructions and advice for safe use of 

electronic training equipment and enable all dog owners to use the training systems 

in an effective, responsible and humane way. All ECMA member´s products meet the 

latest technical requirements which ensure minimum production standards and 

safety features and enable training while protecting animal welfare.

The ECMA is convinced that the electronic training collars are effective and humane 

training tools when used responsibly and combined with an appropriate reward.

For more information please visit 

www.ecma.eu.com

3

Summary of Contents for d-control professional 1000





















Reviews: