Doepke Dupline DSM 1U, Operating Instructions Manual

Page: 7 / 8

3931180/03/06/E 7
Doepke
The following table illustrates the connection configuration:
In order to meet the requirements for protective low voltage, VDE0100, Part 410, should
be observed and put into practice during installation.
10. Guarantee
All professionally installed, unaltered devices are covered by warranty during the statu-
tory guarantee period from the day of purchase by the end user. The guarantee is not ap-
plicable to damage incurred during transport or caused by short-circuit or overloading. In
the event of defects in workmanship or material, which are discovered within the guar-
antee period, the company will provide a replacement free of charge. The guarantee will
be rendered null and void if the device is opened or tampered with.
11. Technical Data
Terminal Description Terminal Description
brown Switching channel (L
IN
) brown Switching channel (L
OUT
)
red Dupline signal con
(D)
black Dupline signal conductor -
(Dupline -)
Min. Typ. Max.
Dupline
Current input 1.1 mA 3.1 mA
a
Input channels None
Output channels 1 switching relay output
Output
Type All-or-nothing relay
AC
Voltage 12 VAC 250 VAC
Load capacity (per output) 100 mA 13 A
DC
Voltage 12 VDC 30 VDC
Load capacity (per output) 100 mA 10 A
Lamp loads
b
Incandescent lamps 3000 W
HV-halogen lamps 2500 W
Fluorescent lamps 2400 W
Fluorescent lamps with el.
ballast
600 W
Gas discharge lamps max. 1000 W (70µF), 1250 W (100µF
c
)
Capacitor for compensation max. 70 µF (100µF
c
)
Energy-saving lamps,
conv. ballast
1250 W
Energy-saving lamps, el.
ballast
d
300 W
Operating Voltage
From bus signal