Dodge Durango SRT 2018, Owner'S Manual

Page: 144 / 664

1. Look behind the seating position where you
plan to install the child restraint to find the
tether anchorage. You may need to move the
seat forward to provide better access to the
tether anchorage. If there is no top tether
anchorage for that seating position, move the
child restraint to another position in the ve-
hicle if one is available.
2. To access the top tether strap anchorages
behind the rear seat, pull the carpeted floor
panel away from the seat back, this will
expose the top tether strap anchorages.
3. Route the tether strap to provide the most
direct path for the strap between the anchor
and the child seat. If your vehicle is equipped
with adjustable rear head restraints, raise the
head restraint, and where possible, route the
tether strap under the head restraint and
between the two posts. If not possible, lower
the head restraint and pass the tether strap
around the outboard side of the head re-
straint.
4. For the center seating position, route the
tether strap over the seatback and headrest
then attach the hook to the tether anchor
located on the back of the seat.
5. Attach the tether strap hook of the child
restraint to the top tether anchorage as
shown in the diagram.
Pulling Down The Carpet Floor Panel To
Access Top Tether Strap Anchorage (Five
Passenger)
Pulling Down The Carpet Floor Panel To
Access Top Tether Strap Anchorage
Top Tether Strap Anchorage (Located On
Seatback)
Bench Seat Top Tether Strap Mounting
(5 Passenger Seating)
141