Dodge DURANGO 2020 Owner'S Manual Download Page 221

Page: 221 / 452

STARTING AND OPERATING

219

NABLING

ISABLING

ARK

ENSE

ParkSense can be enabled and disabled with

the ParkSense switch.

When the ParkSense switch is pushed

to disable the system, the instrument

cluster will display the “PARKSENSE

OFF” message for approximately five

seconds. When the gear selector is moved to

REVERSE and the system is disabled, the

instrument cluster display will display the

“PARKSENSE OFF” message for as long as the

vehicle is in REVERSE.
Refer to “Instrument Cluster Display” in

“Getting To Know Your Instrument Panel” for

further information.
The ParkSense switch LED will be on when

ParkSense is disabled or requires service. The

ParkSense switch LED will be off when the

system is enabled. If the ParkSense switch is

pushed, and the system requires service, the

ParkSense switch LED will blink momentarily,

and then the LED will be on.

PERATION

ITH

A T

RAILER

For vehicles equipped with an Integrated Trailer

Brake Module (ITBM), the operation of the rear

sensors is automatically deactivated when the

trailer's electric plug is inserted in the vehicle's

tow hook socket. When the vehicle is connected

to a trailer, the instrument cluster display will

show the “Rear ParkSense Unavailable Trailer

Connected” message in the following

situations:



For five seconds at vehicle start up



For five seconds when the ParkSense button

is pushed



As long as the vehicle is in REVERSE

NOTE:

Refer to “Towing Requirements” in “Starting

And Operating” for more information on the

Integrated Trailer Brake Module.

ERVICE

ARK

ENSE

EAR

ARK

SSIST

YSTEM

During vehicle start up, when the ParkSense

Rear Park Assist system has detected a faulted

condition, the instrument cluster will actuate a

single chime, once per ignition cycle, and it will

display the “PARKSENSE UNAVAILABLE WIPE

REAR SENSORS” or the “PARKSENSE

UNAVAILABLE SERVICE REQUIRED” message.

Refer to “Instrument Cluster Display” in

“Getting To Know Your Instrument Panel” for

further information. When the gear selector is

moved to REVERSE and the system has

detected a faulted condition, the instrument

cluster display will display the "PARKSENSE

UNAVAILABLE WIPE REAR SENSORS" or

"PARKSENSE UNAVAILABLE SERVICE

REQUIRED" message for as long as the vehicle

is in REVERSE. Under this condition, ParkSense

will not operate.
If “PARKSENSE UNAVAILABLE WIPE REAR

SENSORS” appears in the instrument cluster

display make sure the outer surface and the

underside of the rear fascia/bumper is clean

and clear of snow, ice, mud, dirt or other

obstruction and then cycle the ignition. If the

message continues to appear, see an

authorized dealer.
If “PARKSENSE UNAVAILABLE SERVICE

REQUIRED” appears in the instrument cluster

display, see an authorized dealer.

LEANING

ARK

ENSE

YSTEM

Clean the ParkSense sensors with water, car

wash soap and a soft cloth. Do not use rough or

hard cloths. Do not scratch or poke the sensors.

Otherwise, you could damage the sensors.

20_WD_OM_EN_USC_t.book Page 219

Summary of Contents for DURANGO 2020





































































































































































































































































































































































































































































Search results

Summary of Contents for DURANGO 2020

Reviews:

Related manuals for DURANGO 2020

Brands by name

Popular brands

Dodge DURANGO 2020, Owner'S Manual

Search results

Summary of Contents for DURANGO 2020

Reviews:

Related manuals for DURANGO 2020

Brands by name

Popular brands