manualshive.com logo in svg

Dodge Charger Pursuit 2011, Upfitter Manual

Share
Download
Dodge Charger Pursuit 2011 Upfitter Manual Download Page 52

50 

Dodge Charger Pursuit Upfitter Guide

 

Occupant Restraint System Wiring

All occupant restraint system wiring must remain intact and may not be used for any other 

purpose.  This includes the driver and front passenger seat wiring.  Any electrical connector that 

is yellow is part of the occupant restraint system and should not be modified or used for other 

purposes.

Occupant Restraint System Verification

After any modification work is complete, confirm the occupant restraint system readiness as 

follows: turn the ignition key to the ON position.  The airbag lamp in the instrument cluster 

illuminates for 6 to 8 seconds, and then turns off.  If the airbag lamp fails to illuminate, repeatedly 

cycles on and off, or does not turn off, have the condition corrected by an authorized Chrysler LLC 

dealership before shipping the vehicle to the customer.

Summary of Contents for Charger Pursuit 2011































































Reviews:

No comments

Brands by name

Popular brands

Load more brands