Dodge Avenger 2011 Owner'S Manual Download Page 99 | Manualshive

Page: 99 / 494

background image

Heated Mirrors — If Equipped

These mirrors are heated to melt frost or ice. This feature
is activated whenever you turn on the rear window
defroster. Refer to “Rear Window Features” in “Under-
standing the Features of Your Vehicle” for further
information.

Illuminated Vanity Mirrors — If Equipped

An illuminated vanity mirror is on each sun visor. To use
the mirror, rotate the sun visor down and swing the
mirror cover upward. The lights will turn on automati-
cally. Closing the mirror cover turns off the lights.

Uconnect™ Phone — IF EQUIPPED

Uconnect™ Phone is a voice-activated, hands-free, in-
vehicle communications system. Uconnect™ Phone al-
lows you to dial a phone number with your mobile
phone using simple voice commands (e.g., “Call”

ѧ

“Mike”

ѧ

“Work” or “Dial”

ѧ

“248-555-1212”). Your

Illuminated Vanity Mirror

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

97

«
...
97
98
99
100
101
...
»

Summary of Contents for Avenger 2011















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Avenger 2011

AUDI 4G HIGHEND

Brand: KAP Pages: 20

Brand: Yakima Pages: 12

Brand: JEHNERT SOUND DESIGN Pages: 8

Experience Series

Brand: Rainbow Pages: 19

Brand: Yakima Pages: 12

VIEWLINE 52 MM - MOUNTING 11-09

Brand: VDO Pages: 4

Brand: AA Products Pages: 6

Brand: Flash Cover Pages: 2

Brand: Westfalia Pages: 10

GMC Yukon Denali 2005

Brand: Cadillac Pages: 456

Brand: Saab Pages: 63

Brand: R&G Pages: 20

Brand: Whispbar Pages: 70

Brand: RAM Pages: 666

PerfectView LCD350

Brand: Waeco Pages: 36

Brand: Car-Interface Pages: 23

Brand: Ford Pages: 51

Brand: Mazda Pages: 605

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands