Dodge Avenger 2011 Owner'S Manual Download Page 429

Page: 429 / 494

hot or cold weather and other extreme conditions will
have an adverse effect on paint, metal trim, and under-
body protection.

The following maintenance recommendations will enable
you to obtain maximum benefit from the corrosion
resistance built into your vehicle.

What Causes Corrosion?

Corrosion is the result of deterioration or removal of
paint and protective coatings from your vehicle.

The most common causes are:

•

Road salt, dirt, and moisture accumulation.

•

Stone and gravel impact.

•

Insects, tree sap, and tar.

•

Salt in the air near seacoast localities.

•

Atmospheric fallout/industrial pollutants.

Washing

•

Wash your vehicle regularly. Always wash your ve-
hicle in the shade using MOPAR

威

Car Wash or equiva-

lent, or a mild car wash soap, and rinse the panels
completely with clear water.

•

If insects, tar, or other similar deposits have accumu-
lated on your vehicle, use MOPAR

威

Super Kleen Bug

and Tar Remover or equivalent to remove.

•

Use a high quality cleaner wax, such as MOPAR

威

Cleaner Wax or equivalent to remove road film, stains
and to protect your paint finish. Take care never to
scratch the paint.

•

Avoid using abrasive compounds and power buffing
that may diminish the gloss or thin out the paint
finish.

MAINTAINING YOUR VEHICLE

427

Summary of Contents for Avenger 2011















































































































































































































































































































































































































































































































Search results

Summary of Contents for Avenger 2011

Reviews:

Related manuals for Avenger 2011

Brands by name

Popular brands

Dodge Avenger 2011, Owner'S Manual

Search results

Summary of Contents for Avenger 2011

Reviews:

Related manuals for Avenger 2011

Brands by name

Popular brands