Dodge 2015 Journey Owner'S Manual Download Page 335

Page: 335 / 648

•

Subscription Info

New vehicle purchasers or lessees will receive a free

limited time subscription to SIRIUS Satellite Radio with

your radio. Following the expiration of the free services,

it will be necessary to access the information on the

Subscription Information screen to re-subscribe.
Press the Subscription Info button on the touchscreen to

access the Subscription Information screen.
Write down the SIRIUS ID numbers for your receiver. To

reactivate your service, either call the number listed on

the screen or visit the provider online.

NOTE:

SIRIUS Travel Link is a separate subscription.

Customer Programmable Features — Uconnect®
System 8.4 Settings

Press the “More” button on the touchscreen, then press

the “Settings” button on the touchscreen to display the

menu setting screen. In this mode the Uconnect® system

allows you to access programmable features that may be

equipped such as Display, Clock, Safety/Assistance,

Lights, Doors & Locks, Auto-On Comfort & Remote Start,

Engine Off Operation, Compass Settings, Audio, Phone/

Bluetooth® and SIRIUS Setup.

NOTE:

Only one touchscreen area may be selected at a

time.
When making a selection, press the button on the touch-

screen to enter the desired mode. Once in the desired

mode, press and release the preferred setting until a

check-mark appears next to the setting, showing that

setting has been selected.

UNDERSTANDING YOUR INSTRUMENT PANEL 333

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands