Dodge 2015 Charger, Operating Instructions Manual

Page: 163 / 712

power sunroof (if equipped), and power outlets
will remain active for up to 10 minutes after the
ignition is cycled to OFF. Opening either front
door will cancel this feature. To change the
Engine Off Power Delay status press the “En-
gine Off Power Delay” button and select from “0
seconds,” “45 seconds,” “5 minutes” or “10
minutes” buttons on the touchscreen. Press the
back arrow/Done button on the touchscreen to
return to the previous menu.
Compass Setting — If Equipped
After pressing the “Compass Settings” button
on the touchscreen the following settings will be
available.
•
Variance
Compass Variance is the difference between
Magnetic North and Geographic North. To com-
pensate for the differences the variance should
be set for the zone where the vehicle is driven,
per the zone map. Once properly set, the com-
pass will automatically compensate for the dif-
ferences, and provide the most accurate com-
pass heading.
NOTE:
Keep magnetic materials away from the top
of the instrument panel, such as iPod’s,
Mobile Phones, Laptop Computers and Ra-
dar Detectors. This is where the compass
module is located, and it can cause interfer-
ence with the compass sensor, and it may
give false readings.
•
Perform Compass Calibration
Press the “Calibration” button on the touch-
screen to change this setting. This compass is
self-calibrating, which eliminates the need to
manually reset the compass. When the vehicle
is new, the compass may appear erratic and
may need to be calibrated. You may calibrate
the compass by selecting the “Calibration” but-
ton on the touchscreen, a pop menu will appear
asking you to finish calibrating process by com-
pleting one or more 360-degree turns (in an
area free from large metal or metallic objects).
Once the calibrating process is successfully
finished, a message on the screen will show it
was done successfully. The compass will now
function normally.
Audio
After pressing the “Audio” button on the touch-
screen the following settings will be available:
•
Balance/Fade
This feature allows you to adjust the Balance
and Fade settings. Press and drag the speaker
icon or use the arrows to adjust, tap the “C” icon
to readjust to the center. Press the back arrow/
Done button on the touchscreen to return to the
previous menu.
•
Equalizer
When in this display you may adjust the Bass,
Mid and Treble settings. Adjust the settings with
Compass Variance Map
160